0.96英寸128×64 OLED,带SSD1315Z IC,30针,3/4线串行接口,I2C

SCE096009-V01是一个COG型的OLED显示器,128×64分辨率,SSD1315Z集成电路,3/4线串行接口,I2C,30针
  • 型号:

    SCE096009-V01
  • Size (inch)尺寸(英寸):

    0.96''
  • 分辨率:

    128×64
  • 外形尺寸(mm):

    24.74x16.90x1.42
  • 可视尺寸(mm):

    22.74x11.86
  • 视域尺寸 (mm):

    21.74x10.86
  • 接口:

    I2C// 3/4-wire SPI
  • IC型号:

    SSD1315Z
  • 颜色:

    Monochrome (White)
  • PIN:

    30
  • FPC类型:

    Soldering
  • 产品详细信息


Basic Information


Display Color:               White
Dot Matrix:                    128×64
Drive IC:                        SSD1315Z
Viewing Angle:              160°
Aperture rate:                78%
Interface:                       3/4wire serial interface, I2C
Outline Dimension:        24.74(W)x16.9(H)x1.42(D)
View area:                      22.74 (W) x 11.86(H)
PIN:                                30
FPC Type:                      Soldering



Drawing





General Specification


ITEM SPECIFICATIONS  UNIT
  MODULE SIZE 24.74(W)x16.9(H)x1.42(D) mm
  VIEWING AREA 22.74 (W) x 11.86(H) mm
  ACTIVE AREA 21.74 (W) x10.86(H) mm
  DOT SIZE 0.15(W) x0.15(H) mm
  DOT PITCH 0.17(W) x0.17 (H) mm
  ASSY.TYPE COG ---
  WEIGHT TBD





Interface Definition



PIN NO. SYMBOL TYPE FUNCTION DESCRIPTIONS
1 NC(GND) P It should be connected to external ground.
2 C2P
C1P/C1N-Pin for charge pump capacitor.
C2P/C2N-Pin for charge pump capacitor.
Connect to each other with a capacitor. They must be floated when the
Charge pump not use.
3 C2N
4 C1P I
5 C1N
6 VBAT P Power supply for charge pump regulator circuit.
It must be connected to external source when charge pump is used. It must be float when charge pump is not used.
7 NC
NC
8 VSS P Ground pin. It must be connected to external ground.
9 VDD P Power pin for logic circuit. It must be connected to external source.
10 BS0 I

Interface selection pins.


11 BS1
12 NC
NC.
13 CS# I Chip Select input pin. Active "L"
14 RES# I Hardware reset input pin. Active "L".
15 D/C# I This is Data/Command control pin.
When the pin is pulled HIGH, the data at D[7:0]  is data. When the pin is pulled LOW, the data at D[7:0] is command. In I2C mode, this pin acts as SA0 for slave address section.
When 3-wire serial interface is selected, this pin must be connected to VSS
16 NC
NC.
17 NC
NC.
18 D0 I/O When serial interface mode is selected,D2 should be either tied LOW or tied together with D1 as the serial data input: SDIN, and D0 will be the serial clock input: SCLK.
When I2C mode is selected, D2, D1 should be tied together and serve as SDA and D0
is the serial clock input, SCL.
19 D1
20 D2
22 NC
NC.
23 NC
NC.
24 NC
NC.
25 NC
NC.
26 IREF I Current reference for brightness adjustment.
This is segment output current reference pin. A resistor should be connected between this pin and VSS .Set the current at 12.5 uA maximum.
27 VCOMH O COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS.
28 VCC P Power supply for OLED driving voltage. A capacitor should be connected between this pin and VSS, when charge pump is used.
It must be connected to external source when charge pump is not used.

29 VLSS P This is an analog ground pin. It should be connected to VSS externally.
30 NC(GND) P It should be connected to external ground.

发送消息
如果您有任何疑问或建议,请给我们留言,我们将尽快回复您!
相关产品
0.42寸 OLED

0.42英寸OLED图形液晶显示器

SCE042001-V01是COG型OLED显示器,分辨率72×40,SSD1306BZ IC,4线串行接口I2C,16针
0.66'' OLED

0.66英寸OLED图形液晶显示器,64×48分辨率SSD1306BZ IC,28针

SCE066001-V01是COG型OLED显示器,分辨率72×40,SSD1306BZ IC,6800/8080接口,4线串行接口I2C,28针
0.69'' OLED

0.69英寸OLED图形液晶显示器,分辨率为96×16 SSD1306BZ IC,14针

SCE069001-V01是一个COG型的OLED显示器,96×16分辨率,SSD1306BZ IC,接口I2C,14针
0.87寸 OLED

0.87英寸OLED图形显示器,128×32分辨率SSD1316Z IC,15针,4线SPI接口

SCE087001-V01是一个COG型的OLED显示器,128×32分辨率,SSD1306Z集成电路,4线SPI接口,15针
0.91寸 OLED

0.91英寸OLED图形显示器,128×32分辨率SSD1316BZ IC,14针,I2C接口

SCE091001-V01是一个COG型的OLED显示器,128×32分辨率,SSD1306BZ IC,I2C接口,14针
0.91'' OLED

d带128×32分辨率SSD1316BZ集成电路、15针、4线串行接口的0.91英寸OLED图形显示器

SCE091003-V01是一种COG型OLED显示器,分辨率128×32,SSD1306BZ集成电路,4线串行接口,15针
0.96寸 OLED

0.96英寸OLED显示屏,128×64分辨率SSD1316BZ IC,30针,6800/8080接口,4线串行接口,I2C

SCE096002-V01是一个COG型的OLED显示器,128×64分辨率,SSD1306BZ IC,4线串行接口,30针
自定义OLED显示器

0.96英寸单oled,128×64,ssd1316bz集成电路,30针,6800/8080接口,4线串行接口,i2c

SCE096003-V01是一个COG型的OLED显示器,128×64分辨率,SSD1306BZ IC,4线串行接口,30针

欢迎光临华之晶
如果您有任何疑问或建议,请给我们留言,我们将尽快回复您!

首页

产品

关于

联系